An average home uses more than a hundred electrical appliances and devices to provide convenience, comfort and security. It is, therefore, essential that a backup home generator is installed to prepare for a power outage.
An automatic home standby generator has major advantages over a manual portable generator. The automatic start, permanent fixture, increase in power, cleaner fuel, low running costs and all-weather operation. Standby power systems start automatically within seconds after electricity goes out and ensures a continuous electrical supply.
A Transfer Switch immediately senses when power is interrupted and transfers power to the generator. It also senses when power is restored and transfers the load back to the utility source and signals the generator to shut down. The automatic standby generator is installed outdoors and linked directly to the home’s permanent fuel supply.
The prime difference is that a battery is meant to store power and a generator creates power. In a power outage, a generator can continuously produce power; a battery can only distribute what has been stored.
The simple answer is no. Both products do help supply electricity that homeowners can use for any electrical device in their home—from air conditioning to microwaves. Home standby generators, when properly installed and wired to the home’s circuitry, can provide adequate wattage to the home to run all selected circuits simultaneously, with the output they require. Home appliances draw different amounts of power when they operate—a microwave may require 1000 watts of power, and a refrigerator may require 500 to 750 watts to operate. Generators steadily produce their power, fully supporting all circuits they are wired to.
The return on investment, however, makes power supplied by a generator less expensive over the life of the product based on how much output it provides. Home batteries cannot supply the full wattage of the power they may hold all at once. For example, a battery that may be charged with up to 10 kWh of energy, in order to protect the longevity of the battery, cannot dispense its power at more than a 2 kilowatts-per-hour rate. This means that only certain appliances would be able to draw power at any given time from the battery. In a power outage, the battery could support only limited items in a home at one time (e.g., just the refrigerator, but not the furnace).
The most reliable source of power for extended or unpredictable power outages is a home standby generator. The generator, which in most cases is connected directly to a home’s natural gas line, has a constant supply of fuel and can operate through extended outages, keeping homes safe, lit and powered.
For people concerned with a loss of natural gas supply during a storm, generators can be fueled by a dedicated LP tank as well.
With this continuous fuel source, generators are much better able to face the unpredictability of dangerous, storm-prompted or lengthy outages rather than a home battery, which relies on an external power source to recharge it after only a few hours of use.
By determining your backup power needs, you can size your generator to fit your home or business. Decide what items are important to you in a power outage. Depending on where you live, having a backup generator can make the difference between burst pipes and shivering through a winter power outage or staying warm and protected while you wait for electricity to be restored. Several considerations come into play when thinking about the size, or wattage, of generator that the typical person needs to have at home.
Use this simple tool from Generac to find what size generator best fits your needs: Generac Sizing Tool
Heating and air conditioning are top concerns, along with running water and hot water.
All of these items are high-load appliances and require a high capacity to start. These actions consume significant power and could quickly drain a battery. There are a number of ways homeowners can prepare for a power outage.
Homeowners who wish to operate the appliances and features of their home without being connected to their community’s standard power grid explore a number of options to provide constant energy to their home. Often these options still require a fuel source. In the case of certain battery backup options, the fuel source is stored solar energy. By going “off grid” a home only powered by a battery power source using solar fuel must rely on the unpredictable coverage and collection of sunlight to recharge it—impractical in most parts of the country. Home standby generators fuel is often available in the homes area in the form of natural gas or propane. A more reliable resource—natural gas—is abundant, relatively inexpensive and cleaner burning than many other fuel types. Propane fuel can be delivered and refilled as their owner desires, unlike sunlight. For those homeowners who wish to disconnect from the power grid in their area, the power that supplies their home must be sourced to a power-supplying unit and safely designed to transfer to their electrical system, a process that requires a professional electrician or generator/battery installer. For anyone who is interested in grid independence, a generator is a valuable component of their off-grid process. Generac has engineered the EcoGen home backup generator as the first automatic unit warranted for off-grid use when used in an alternative energy system.
Home standby generators are designed for backup power in the event of a power outage. Using a generator to power a home full-time is likely impractical from a fuel-consumption perspective, maintenance requirements, etc. However, some standby generators, like the Generac EcoGen, are designed to work in conjunction with alternative-energy-powered homes (solar, wind, etc.) that may be disconnected from the grid.
Both products require installation and proper consultation with electricians in order to ensure your home’s electrical circuitry is properly handled. Generators, beginning at smaller wattages like 7kw, could be installed for as little as $1,000 to $2,500. Prices start at $1,899 for the Generac PowerPact 7kw generator.
The new home battery is priced at approximately $3,000 for the battery. Installation prices are undetermined, but may reflect standard hourly par for electricians, as the generator does/ and the battery will require installation of an AC/DC power inverter, typically costing $2,000 or more, to convert its power output for use in the home. Batteries may also need to be replaced after a few years, more frequently if they go through frequent charging/discharging cycles.
The return on investment, however, makes power supplied by a generator less expensive over the life of the product based on how much output it provides. For example, to provide the same 16 kilowatts of continuous power as a Generac 16,000-Watt Air Cooled Automatic Standby Generator with 200-Amp SE Rated Transfer Switch retailing for around $3,700, a homeowner would need eight stacked Tesla batteries at a cost of $45,000 for a nine-year lease.
The most popular Generac generator model produces 22kW, which is commonly installed to power the entire home, including all the most common appliances in a home, such as high-load central air conditioners, electric heaters, kitchen appliances, etc.
Currently, the whole-house battery is a fledging product with no full-scale distribution network or availability. Home standby generators by Generac, however, are supported by certified dealers and trained installers such as For-Tech Electric, as well as Generac's 1-800-GENERAC support network.
An automatic standby generating system typically has three basic elements: a generator, a transfer switch and a service-entrance breaker.
1. Generator – Produces electricity for essential circuits, such as heating, air conditioning, refrigeration, security and lighting. Your backup needs, simple or more extensive, determine the size and output of the unit.
2. Transfer Switch – Immediately senses when power is interrupted and transfers power generation responsibility to the generator. Senses when power is restored and transfers the load back to the utility source and signals the generator to cool off and shut down.
3. Service Entrance Breaker – Provides protection to your transfer switch, internal breakers and circuits and generator due to electrical strikes and power surges. See below for the step by step process of a Generator Installation:
A common concern for homeowners is how to maintain their standby generator once it is installed. Maintaining a generator is similar to maintaining a car and maintenance is essential for supreme performance and long life. Just like a car, you will have an owner’s manual for your generator unit with very specific directions and maintenance. For-Tech Electric offers a comprehensive maintenance agreement to ensure proper service is performed in a timely manner. Our Generec factory trained technicians will come out to change the oil, check the battery and connections, change the air or oil filer as needed, as well as other routine tests. Let For-Tech Electric ensure your peace of mind with our service agreement.